Home / Cases

Selected installationsCase studies

From single machines to complete foundry lines — a selection of installations across India, South Asia and China. Every project starts with a casting sample, not a brochure.

Selected projectsReference projects

Case studies
Ferrous foundry in India
India

Ferrous foundry in India

ZOOMZU automatic moulding equipment has been in service for more than a year at a ferrous foundry in India. This page describes the site only; it does not name the customer or quote performance figures.

View case →
New foundry workshop in India, October 2026
October 2026 · India

New foundry workshop in India, October 2026

In October 2026, ZOOMZU automatic moulding equipment was commissioned in a new workshop at a foundry in India. The photographs show the moulding machine, the moulding line and ZOOMZU staff on site. The plant name, machine model and output figures are not stated.

View case →
Application data: automatic moulding of brake discs

Application data: automatic moulding of brake discs

This is application data, not a named-customer case and not linked to any country. A vertical-blow automatic moulding machine may be paired with a mould trolley conveyor and an automatic pouring machine. In this application, the crew can be reduced from about eight to ten people to one operator; deep-cavity fill is above 98 per cent, and defects such as sand holes and swell can be cut by more than 70 per cent.

View case →
Automatic moulding line in Thailand
5–6 August 2026 · Thailand

Automatic moulding line in Thailand

In August 2026, ZOOMZU recorded an automatic moulding line at a customer foundry in Phanat Nikhom, Thailand, including the moulding machine in operation and pouring. The customer is not named.

View case →
Installation and commissioning in Vietnam
13 September 2026 · Vietnam

Installation and commissioning in Vietnam

In September 2026, installation and commissioning were under way at a customer site in Vietnam. The photographs show the moulding line and sand-system plant. The customer and city are not named.

View case →
1500 × 1500 moulding line in Fujian
May–September 2026 · Fujian, China · Flask 1500 × 1500

1500 × 1500 moulding line in Fujian

This is a continuing project for one customer in Fujian. A 1500 × 1500 (300/300) moulding machine was delivered first and successfully commissioned on site in May 2026; the site post for this line states that mould compaction met the required standard. A matching automatic trolley open line was then dispatched to the same customer in September. The customer is not named, and this case is not to be combined with the red-machine case in India.

View case →
850 × 1100 moulding machine in Huizhou, Guangdong
8 June 2026 · Huizhou, Guangdong, China · Flask 850 × 1100

850 × 1100 moulding machine in Huizhou, Guangdong

In June 2026, an 850 × 1100 moulding machine was recorded in production at a foundry in Huizhou, Guangdong, making castings. The customer is not named, and no specific casting name is given.

View case →
SXH 550 × 650 commissioned in Shiyan, Hubei
October–November 2026 · Shiyan, Hubei, China · SXH 550 × 650

SXH 550 × 650 commissioned in Shiyan, Hubei

A ZOOMZU SXH 550 × 650 moulding machine was installed at a customer site in Shiyan, Hubei, in October 2026 and was being commissioned into production in November, as recorded in a site film dated 12 November 2026 titled as installation and start-up in progress. The customer is not named.

View case →
SXH 700 × 800 moulding machine in place in Botou, Hebei
October–November 2026 · Botou, Hebei, China · SXH 700 × 800

SXH 700 × 800 moulding machine in place in Botou, Hebei

The SXH 700 × 800 moulding machine dispatched in October 2026 to a foundry in Botou, Hebei, was in place and running at the customer’s workshop in November. The site post for this line recorded that, with the new machine in place, output had doubled. The customer is not named.

View case →
850 × 950 moulding machine in Lishui, Zhejiang, for injection-moulding machine castings
September 2026 · Lishui, Zhejiang, China · Flask 850 × 950

850 × 950 moulding machine in Lishui, Zhejiang, for injection-moulding machine castings

The 850 × 950 moulding machine with lower-flask roll-out and core setting, dispatched to Lishui, Zhejiang, in September 2026, is in operation at the customer’s site, producing internal castings for injection-moulding machines. The site post for this line states that about 120–180 kg of iron is poured per mould. The customer is not named.

View case →
Automated moulding for pipe fittings and valves
17 June 2026

Automated moulding for pipe fittings and valves

The photographs show automated moulding of pipe fittings and valves. The customer and location are not named.

View case →
SXH 610 × 710 moulding machine in production
26 October 2026 · SXH 610 × 710

SXH 610 × 710 moulding machine in production

A ZOOMZU SXH 610 × 710 moulding machine is shown running in a customer workshop, with pouring recorded in the same visit. According to the site post for this line, moulds are made in the afternoon and poured in the evening; about 80–100 kg of iron is poured per mould, with about 200 moulds a day and some 15–20 tonnes of iron poured. The customer and location are not named.

View case →
Visit to Akshay in India
20 March 2026 · India

Visit to Akshay in India

The ZOOMZU team visited Akshay in India, with discussions in the workshop and a group photograph in front of a ZOOMZU machine. This is a visit record and is not the same item as the other India cases.

View case →

Tell us your castingTell us your casting and output targets

Request a quote →
WhatsApp