Home / News

News & updatesNews & updates

Exhibitions, new machine models, delivery milestones and aftermarket notes — what is happening at ZOOMZU and on the foundry floor.

LatestLatest

Updates
News

SXH 700 × 800 moulding machine in place in Botou, Hebei

The SXH 700 × 800 moulding machine dispatched in October 2026 to a foundry in Botou, Hebei, was in place and running at the customer’s workshop on 6 November. The site post for this line recorded that, with the new machine in place, output had doubled. The customer is not named.

News

SXH 610 × 710 moulding machine in production

A film posted on 26 October 2026 shows a ZOOMZU SXH 610 × 710 moulding machine running in a customer workshop, with pouring later in the same clip. According to the site post for this line, moulds are made in the afternoon and poured in the evening; about 80–100 kg of iron is poured per mould, with about 200 moulds a day and some 15–20 tonnes of iron poured. The customer and location are not named.

News

SXH 550 × 650 moulding machine installed and commissioned in Shiyan, Hubei

A ZOOMZU SXH 550 × 650 moulding machine was installed at a customer site in Shiyan, Hubei, on 19 October 2026 and was being commissioned into production in November. A site film dated 12 November 2026 is titled as installation and start-up in progress, and shows the nameplate. The customer is not named.

News

700 × 800 moulding machine dispatched to Botou, Hebei

On 4 October 2026, a 700 × 800 (300/300) automatic top-and-bottom sand-shooting moulding machine was dispatched from the ZOOMZU works to Botou, Hebei. The nameplate reads SXH 700 × 800. This is the same machine later recorded in place and running at the foundry in Botou; see N1. The customer is not named.

News

Automatic trolley open line for a 1500 × 1500 moulding machine dispatched to Fujian

On 20 September 2026, an automatic trolley open line matched to a 1500 × 1500 moulding machine was dispatched from the ZOOMZU works to Fujian. This is a continuing project for the same customer in Fujian, whose 1500 × 1500 moulding machine had already been commissioned on site in May (see N17). The customer is not named.

News

Installation and commissioning under way in Vietnam

On 13 September 2026, installation and commissioning were under way at a customer site in Vietnam. The film shows the moulding line and sand-system plant. The customer and city are not named.

News

850 × 950 moulding machine dispatched to Lishui, Zhejiang

On 2 September 2026, an 850 × 950 (300/300) automatic top-and-bottom sand-shooting moulding machine was dispatched from the ZOOMZU works to Lishui, Zhejiang. This is the same machine later recorded in operation at the customer’s site, producing internal castings for injection-moulding machines; see N6. The customer is not named.

News

ZOOMZU automatic moulding line in operation in Thailand

On 5–6 August 2026, ZOOMZU recorded an automatic moulding line at a customer foundry in Phanat Nikhom, Thailand, including the moulding machine in operation and pouring. The customer is not named. The two days of footage are from the same plant and should be presented as one item.

News

ZOOMZU at FENAF 2026, São Paulo

From 21 to 24 July 2026, Guangdong Zhongzhu Intelligent Equipment Co., Ltd (ZOOMZU) exhibited at FENAF 2026, the 21st Latin American Foundry Fair, at stand D08-2 at São Paulo Expo. The team received visitors at the booth and presented automatic moulding machines and complete line solutions.

News

Fatigue testing before shipment

On 12 June 2026, a moulding machine underwent fatigue testing before shipment. The post for this pre-shipment test states that the machine was dry-cycled (run without sand) more than 2,000 times.

News

1500 × 1500 moulding machine commissioned in Fujian

On 31 May 2026, a 1500 × 1500 (300/300) moulding machine was successfully commissioned at a customer site in Fujian. The site post for this line states that mould compaction met the required standard. This is a continuing project for the same customer in Fujian: the 1500 × 1500 moulding machine had been dispatched earlier, and a matching automatic trolley open line followed in September (see N7). The customer is not named, and this item is not to be combined with the red-machine case in India.

Get the latest datasheetGet the latest datasheet and quote

Contact us →
WhatsApp